Record Store Day has come and gone this year but Fluance is still providing ways for vinyl lovers to make the most of their collections with the PA10. The Fluance PA10 is a high fidelity phono preamp that the company says will deliver users a more clear and precise signal.
The PA10 “precisely” converts the turntable phono signal to line level, allowing listeners to connect a turntable to the amplifier for a highly accurate reproduction with “impeccable” RIAA equalization. The Fluance PA10
Uncompromised Phono Amplification & Equalization
The PA10 precisely converts the turntable phono signal to line level, allowing listeners to connect a turntable to the amplifier for a highly accurate reproduction with impeccable RIAA equalization.
Sophisticated Design, Engineered with Premium Components
Superior components, low noise power supply
and low impedance output stage achieve an incredibly low ±0.5 dB RIAA deviation, greater gain performance and ultra-low harmonic distortion for a clean and detailed presentation.Vivid Stereo Soundstage
Single channel left and right Texas Instruments OP amps provide optimal channel separation and virtually no crosstalk during signal reproduction and amplification stages. The precise signal reproduction results in pure, immersive stereo sound.
Subsonic Rumble Filtering
Applying the selectable high pass filter will slowly roll off the low end below 20Hz, reducing resonant feedback and rumble when listening at loud volumes or heavy bass passages. This also eliminates woofer pumping which drastically reduces unwanted acoustic feedback to the stylus.
Protected from Electronic Interference
Within the stylish wood exterior is a protective metal enclosure to shield the PA10 from electro-magnetic interference and electronic noise.
Fluance Press Release
| Audio Characteristics | |
| Gain | 38 dB |
| Audio Circuit Type | Passively Equalized RIAA |
| Compatible Styli | MM |
| RIAA equalisation accuracy (deviation) | 20 Hz – 20,000Hz +/- 0.5 dB |
| Total Harmonic Distortion (THD) | <0.004% |
| Noise Floor (unweighted) | < 220 uV |
| Crosstalk (20-20000Hz) | > -86 dB |
| S/N Ratio | > 90 dBA |
| Dynamic Range | > 85 dB |
| High Pass Filter Cut Off | 20 Hz |
| Ground Terminal | Yes |
| Phono Input Sensitivity | 30 mV |
| Input Load Capacitance | 100 pF |
| Input Impedance | 47 kohm |
| Maximum Input @ 1 kHz | 100 mV |
| Maximum Phono Stage Output | 125 mV |
| Output Impedance | 100 ohms |
| Output Voltage | 2.2 V |
| Input/Output Specifications | |
| Inputs | Gold Plated RCA L/R, unbalanced |
| Outputs | Gold Plated RCA L/R, unbalanced |
| Cabinet Specifications | |
| Material | MDF |
| Finish | PVC Wood – Black |
| Power Specification | |
| Input Power | 110 V-240 V ~ 50/60 Hz 0.5 A |
| Output Power | 24 V, 500 mA |
| Consumption | 0.4 W |
| General Specifications | |
| Unit Dimensions (W x H x D) | 4 x 2.25 x 3.6 inches (101.5 x 57.1 x 91.5 mm) |
| Unit Weight | 11.5 oz (325 g) |
| Operating Temperature | -5 °C – 45°C |
| Compatible with | Fluance RT80, RT81, RT82, RT83, RT84, and RT85 turntables as well as any turntables that are equipped with a Moving Magnet cartridge |
The PA10 Phono Preamplifier is now available for $79.99 at www.fluance.com. What do you think of this new phono preamp? Let us know in the comments below or on Twitter, or Facebook. You can also comment on our MeWe page by joining the MeWe social network.
Last Updated on February 3, 2021.
